Table of Contents
Advertisement
80
PCS100 AVC-20 User Manual
10.1 Cybersecurity
10.1.1
Cybersecurity Disclaimer
This product is designed to be connected to and to communicate information and data via a network interface. It
is Customer's sole responsibility to provide and continuously ensure a secure connection between the product
and Customer network or any other network (as the case may be). Customer shall establish and maintain any
appropriate measures (such as but not limited to the installation of firewalls, application of authentication
measures, encryption of data, installation of anti-virus programs, etc.) to protect the product, the network, its
system and the interface against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data
or information.
10.1.2
List of User/System accounts in ABB delivery
Linux root account is only available as a service account used with SSH. SSH port is disabled by default, however,
it can be enabled through parameter settings.
10.2 Remote Web Pages
The Graphical Display Module contains a set of web pages that are similar in format to the standard GDM pages
described in section 6.1. Graphic Display Module
and viewed on a remote PC using any standard web browser.
The following pages are supported:
2.
Status page
3.
Event Log
4. Product page
5.
Summary page
6. Service page
7.
Menu page (if enabled via parameter 26 GDM Remote Menus)
Figure 10-2: PCS100 AVC-20 Remote Web Pages Status Page
Note: The following pictures are examples and the values on the display do not represent all models.
(GDM).
They may be accessed via the Ethernet port of the GDM
Each page contains the
Navigation Panel, and
the Status Bar, and
each page is accessed
by clicking the buttons
using a mouse.
Start(I)/Stop(O)/Reset
functionality
is
only
supported
through
these pages if remote
menu access is enabled
via parameter A31 GDM
Control Enable.
Advertisement
Table of Contents
