Setting Up Nokia Ip40 Security Platform With An Apple Computer; Connecting Nokia Ip40 Security Platform To The Network; Installing Your Network - Nokia IP40 User Manual

2
Installing Nokia IP40 Security Platform

Setting Up Nokia IP40 Security Platform with an Apple Computer

Use the following procedure to set up the TCP/IP protocol:
To make TCP/IP settings
1. Choose Apple Menus > Control Panels > TCP/IP.
The TCP/IP window opens.
2. Select Ethernet from the Connect via drop-down list.
3. Select Using DHCP Server from the Configure drop-down list.
4. Close the window and save the setup.

Connecting Nokia IP40 Security Platform to the Network

The following topology examples illustrate proper network cabling.
Figure 3 IP40 Topologies

Installing Your Network

Plan your network and the location of the IP40, then install your network.
To install the network
1. Connect the LAN cable
a. Connect one end of the Ethernet cable to the LAN port at the rear end of the device.
b. Connect the other end of the Ethernet cable to the computer, hubs, or another network.
46
device.
Nokia IP40 Security Platform User's Guide v2.0