Table of Contents
Advertisement
About this Guide
This manual provides information for the installation and use of the Nokia IP1200 Series
security platforms. Installation and maintenance should be performed by experienced
technicians or Nokia-approved service providers only.
This preface provides the following information:
In this Guide
Conventions this Guide Uses
Related Documentation
In this Guide
This guide is organized into the following chapters and appendixes:
Chapter 1, "Overview"
Platform.
Chapter 2, "Installing the Nokia IP1200 Series Appliance"
Nokia IP1200 Series appliance.
Chapter 3, "Performing the Initial Configuration"
network and to a power source and how to make the appliance available on the network.
Chapter 4, "Installing and Replacing Network Interface Cards and Accelerated Data Path
(ADP) Services Modules"
cards (NICs) and Accelerated Data Path (ADP) services modules.
Chapter 5, "About IP1200 Series Appliance Network Interface Cards"
connect to and use each of the supported NICs.
Chapter 6, "Installing and Replacing ADP Modules"
each of the supported Accelerated Data Path (ADP) services modules.
Chapter 7, "Installing and Replacing Components Other than Network Interface Cards
(NICs) and Accelerated Data Path (ADP) Services Modules"
replace memory, hard-disk drives, and power supplies.
Chapter 8, "Troubleshooting"
solutions to these problems.
Appendix A, "Technical Specifications"
characteristics.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
presents a general overview of the Nokia IP1200 Series Security
describes how to install, monitor, and replace network interface
discusses problems you might encounter and proposes
describes how to install the
describes how to physically connect it to a
describes how to connect to and use
describes how to install or
provides technical specifications such as interface
describes how to
13
Advertisement
Table of Contents
