Viewing The Variables And Other System Parameters; Table 6 Boot Flags - Nokia EM5400 Installation Manual

7
Using the Nokia IPSO Boot Manager
The following table shows possible boot flags.

Table 6 Boot Flags

Flag
-d
-s
-v

Viewing the Variables and Other System Parameters

This section describes other command variable and parameters you can use
with the boot manager.
printenv
Use the printenv command to view the values of variables currently stored in
the boot-manager non-volatile memory. The command has the following
syntax:
printenv
62 Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
Meaning
Debug mode. Enters the kernel debugger as soon as possible in the
kernel initialization.
Single-user mode. If the console is marked as insecure, you must enter
the root password to access the manager.
Verbose mode. Verbose during device probing and thereafter.