Mitsubishi Electric GOT1000 Series Connection Manual page 376

12.2.5 PLC Side Setting
POINT POINT POINT
TOSHIBA PLC
For details of the TOSHIBA PLC, refer to the following
manual.
TOSHIBA PLC user's Manual
Model name
T2 (PU224),
T2E, T2N
PLC CPU T3, T3H
model 2000 (S2, S2T, S2E),
model 3000 (S3)

Connecting to T2 (PU224), T2E or T2N
(1) Switch setting
Set the switches accordingly.
(a) Operation mode setting switch
Switch No.
OFF ON
1
4
2
3
4
5
5
6
(b) DIP switch on module PCB (T2N only)
Switch No.
For RS-232
communication
DIP switch: No. 1 ON (RS-232C)
*1 Can be used as RS-422.
(2) Transmission parameter setting
Enter the transmission parameters.
Item
*1*2*3
4800bps, 9600bps, 19200bps
Transmission speed
Data bit 7bit
Stop bit 2bit
Parity bit Even
Station No. 1
*1 Indicates only the transmission speeds that can be set on
the GOT side.
*2 Fixed to 9600bps for T2E only.
*3 The transmission speed setting must be consistent with that
of the GOT side.
For the transmission speed setting on the GOT side, refer to
the following.
 Setting communication interface (Communication
settings)
12 - 8
12. CONNECTION TO TOSHIBA PLC
12.2 Serial Connection
Refer to
n
n
n
Settings Setting details
OFF (fixed)
Computer link
OFF (fixed)
Set value
For RS-422
communication
*1
OFF (RS-485 )
Set value

Connecting to T3 or T3H
Enter the transmission parameters.
Item
*1*2
4800bps, 9600bps, 19200bps
Transmission speed
Data bit 7bit
Stop bit 2bit
Parity bit Even
Station No. 1
*1 Indicates only the transmission speeds that can be set on
the GOT side.
*2 The transmission speed setting must be consistent with that
of the GOT side.
For the transmission speed setting on the GOT side, refer to
the following.
 Setting communication interface (Communication
settings)

Connecting to model 2000 (S2, S2T, S2E),
model 3000 (S3)
Enter the transmission parameters.
Item
Transmission method
RS485
RS485 COM1
Timeout time 5sec
*2*3
4800bps, 9600bps, 19200bps
Transmission speed
Data bit 7bit
Stop bit 2bit
Parity bit Even
Station No. 1
*1 Can be used as RS-422.
*2 Indicates only the transmission speeds that can be set on
the GOT side.
*3 The transmission speed setting must be consistent with that
of the GOT side.
For the transmission speed setting on the GOT side, refer to
the following.
 Setting communication interface (Communication
settings)
Set value
Set value
*1