Precautions - Mitsubishi Electric GOT1000 Series Connection Manual

3.7 Precautions


Station number setting of the temperature controller system
• When connecting to DMC10 or SDC
Make sure to establish temperature controller system with No.1 station.
• When connecting to DMC50/AHC2001
A COM module or temperature controller with the station number set with the host address must be included.

GOT clock control
Since the control equipment does not have a clock function, the settings of "time adjusting" or "time broad cast" by
GOT clock control will be disabled.

Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device. For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.

When DMC50/AHC2001 and DMC10/SDC are mixed
GOT does not support connections with DMC50 and DMC10/SDC mixed.

Station number range of AHC2001
Although the station number range of AHC2001 is 1 to 127, use the station number range of DMC50 of 1 to 15.

Device range of AHC2001
The GOT does not support all the devices of AHC2001.
Use AHC2001 with the GOT within the device range equivalent to that of DMC50.
3 - 58
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.7 Precautions
3.4.2 Communication detail settings
GT Designer3 Version1 Screen Design Manual