Mitsubishi Electric GOT1000 Series Connection Manual page 368

11.7 Precautions

Station number settings of temperature
controller
In the system configuration, the controller with the
station number set with the host address must be
included.
For details of host address setting, refer to the
following.
11.4.1 Setting communication interface
(Communication settings)

GOT clock control
Since the controller does not have a clock function, the
settings of [time adjusting] or [time broad cast] by GOT
clock control will be disabled.

Disconnecting some of multiple connected
equipment
The GOT can disconnect some of multiple connected
equipment by setting GOT internal device.For example,
the faulty station where a communication timeout error
occurs can be disconnected from connected
equipment.
For details of GOT internal device setting, refer to the
following manual.
GT Designer3 Version1 Screen Design Manual
11 - 34
11. CONNECTION TO CHINO CONTROLLER
11.7 Precautions