Entering A Reference Value - ABB ACS5000 User Manual

If you change the direction while the motor is running, the motor
automatically ramps down to zero speed and reaccelerates in the
opposite direction to the preset speed. The arrow changes at zero speed.
9.3.2

Entering a reference value

Entering a reference value from the CDP control panel is possible in:
• Local control mode (L)
• Remote control mode (R)
1. Press a mode selection key.
2. To enter the reference value input mode, press the REF key.
3BHS799208 E01 REV E
ACT PAR FUNC DRIVE
I 0
ACT PAR FUNC DRIVE
I 0
ACT PAR FUNC DRIVE
I 0
ACS5000 WATER-COOLED USER MANUAL
1 L <- 600.0 rpm
StateINU ReadyOn
MOTOR SP 600.00 rpm
POWER 75.0 kW
1 L -> 600.0 rpm
StateINU ReadyRun
MOTOR SP 600.00 rpm
POWER 75.0 kW
1 L -> [600.0 rpm]
StateINU ReadyRun
MOTOR SP 600.00 rpm
POWER 75.0 kW
09 CDP CONTROL PANEL
0
0
159/186