Trademarks - ABB ACS5000 User Manual

Term/Abbreviation
Motor terminal
section
NP
OEI
PCU
Phase module
PINT
SW
S800 I/O
Transformer
terminal section
WCU
1.5

Trademarks

Names that are believed to be trademarks of other companies and
organizations are designated as such. The absence or presence of such a
designation should however not be regarded as an offense of the legal
status of any trademark. The following registrations and trademarks are
used in this manual:
Trademark
ABB Ability™
Arc Guard System™
DeviceNet®
DriveWare®
Ethernet®
Industrial IT™
3BHS799208 E01 REV E
Table 1-8 Terms and abbreviations (continued)
Definition
This is the customer terminal for connecting motor
cables. It is located behind the swing frame of the COU
compartment.
Neutral point
Optical-electrical interrupter
A primary phase converter unit (PCU) consists of a
transformer terminal section, a rectifier stack, a DC link
and an inverter stack.
A secondary phase converter unit consists of a DC link and
an inverter stack.
The phase module is a compact assembly of wired
components including power semiconductors and circuit
boards that serves as a standardized building block for
the inverter and rectifier stack.
Pulse interface
Software
The S800 I/O is a distributed process input / output
system that can be connected to various process
controllers from ABB and other companies.
This is the customer terminal for connecting transformer
cables. It is located in the back of the PCU compartment.
The water cooling unit (WCU) dissipates heat losses of
the power electronics.
Table 1-9 Trademarks
Description
Registered trademark of ABB
Registered trademark of ABB
Registered trademark of the Open DeviceNet Vendor
Association, Inc.
Registered trademark of ABB
Registered trademark of Xerox Corporation
Trademark of ABB
ACS5000 WATER-COOLED USER MANUAL
01 ABOUT THIS MANUAL
23/186