Actual Signals Mode; Overview - ABB ACS5000 User Manual

9.2.2

Actual signals mode

(1) Display
(2) Actual signal names and values
(3) Selection key for actual
signals mode
(4) Fast navigation key for selecting
the actual signals display or the
fault memory display
9.2.2.1

Overview

Two displays can be selected in the actual signals mode:
• Actual signals display
• Fault memory display
The actual signals display appears first when entering the actual signals
mode. However, when the drive is in a fault condition, the fault memory
display appears instead.
The actual signals display is used to monitor the drive without interfering
with its operation. It continuously displays three selectable actual values.
3BHS799208 E01 REV E
1 L ->
1
StateINU
MOTOR SP
2
POWER
3
4
Figure 9-2 Control panel functions for Actual signals mode
ACS5000 WATER-COOLED USER MANUAL
600.0 rpm
InitSeq....
0.00 rpm
0.0 kW
(5) Slow navigation key for selecting
signals or fault messages
(6) Enter key for confirming the
selection
09 CDP CONTROL PANEL
5
6
142/186