Terms And Abbreviations - ABB ACS5000 User Manual

Title
[14] S800 I/O Getting started
[15] S800 I/O Modules and Termination Units
(1)
Also available online in the ABB Library (https://library.abb.com)
Title
[16] Ethernet - NETA-21 remote monitoring tool
user manual
[17] Modbus - NMBA-01 installation and
start-up guide
[18] Profibus - NPBA-12 installation and
start-up guide
(1)
Also available online in the ABB Library (https://library.abb.com)
1.4

Terms and abbreviations

The following table lists terms and abbreviations you should be familiar
with when using this user manual. Some of the terms and abbreviations
used in this user manual are unique to ABB and might differ from the
normal usage.
Term/Abbreviation
AMC
Converter
COU
CVMI
Drive
3BHS799208 E01 REV E
Table 1-6 I/O interface
(1)
Table 1-7 Serial communications interfaces
(1)
(1)
(1)
Table 1-8 Terms and abbreviations
Definition
The application and motor controller (AMC) is a digital
signal processor and the heart of the drive
control system.
Short form for ACS5000 frequency converter
The control unit (COU) consists of a control section, a
customer interface section and a terminal section.
The control section incorporates the hardware for
control, monitoring and protection functions of the drive
and the communication interface to the door-mounted
CDP control panel.
The COU compartment also incorporates the grounding
frame for cable screens and the ground cable, the
grounding accessories and the motor terminal section.
Current voltage measurement interface
Synonym for ACS5000 frequency converter
ACS5000 WATER-COOLED USER MANUAL
01 ABOUT THIS MANUAL
Document number
(1)
Document number
3AUA0000096939
3AFY58919772
3BFE64341588
3BSE020923
3BSE020924
21/186