10.5.3
S800 I/O modules
LEDs on I/O modules having the same meaning on all types of I/O modules
are always at the same position. The LEDs are always at the topmost
position on each module (Fig. 10-5: 1) and are identified as follows:
• F: fault
• R: run
• W: warning
• O or OSP (only output modules)
LED
Color
F
Red
R
Green
W
Yellow
O
Yellow
OSP
Yellow
Note: For more information, see the following manuals:
• S800 I/O - General information and installation, user's guide
• S800 I/O - Modules and termination unit, user's guide
10.6
Corrective maintenance
Overview on maintenance tasks:
• "10.6.6 Visual checks on the drive" on page 179
3BHS799208 E01 REV E
1
Figure 10-5 Example of S800 I/O station
Indication
Indicates failure
Device is operating normally
External fault or minor fault in the module
Indicates an active signal
Indicates an active signal
(Output Set as Predetermined)
ACS5000 WATER-COOLED USER MANUAL
10 PREVENTIVE AND CORRECTIVE MAINTENANCE
1
1
1
169/186