ABB ACS5000 User Manual page 175

5. Once the white lamp lights up, slide the locking bar from the locked
(1) to the unlocked (2) position.
1
Opening the doors
1. To release the door handle, insert and turn the key to the right.
The door handle pops out.
2. To open the door, turn the door handle:
3. To the right if the door is hinged on the right
4. To the left if the door is hinged on the left.
Closing and locking the doors
Once maintenance of medium voltage compartments is complete,
proceed as follows:
1. To close a door, bring the door handle in line with the door plate and
press the handle down until it clicks in.
2. Before actuating the locking bars, make sure that the drive is
supplied with auxiliary voltage.
3. To lock a door, slide the locking bar from the unlocked (1) to the
locked (2) position.
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL
10 PREVENTIVE AND CORRECTIVE MAINTENANCE
2
175/186