NEC Electra Elite IPK II Features And Specifications Manual page 839

Electra Elite IPK II
r With an analog trunk, the Continue/Disconnect code may work using DTMF sounds from
the opposite side trunk. With an ISDN trunk, Program 14-01-25 must be enabled to detect
the Continue/Disconnect code.
r The Continue/Disconnect code is not accepted while dialing a trunk.
r Continue/Disconnect codes will not work if all receivers are busy.
When used with the Networking feature, both systems must be programmed the same for
r
the Continue/Disconnect codes.
r A trunk can be set up to automatically tandem trunk/forward to an outside telephone
number or Speed Dial – System/Group Dialing bin.
r Other programmed options for incoming and outgoing calls can affect how calls are
handled. Refer to "Central Office Calls, Answering / Central Office Calls, Placing" and
check or program these options as needed.
r DISA calls also use the same Continue/Disconnect codes.
Default Setting
Disabled
System Availability
Terminals
Multiline Terminals and Single Line Telephones
Required Component(s)
None
Tandem Trunking (Unsupervised Conference)
Document Revision 1
2 - 817