Continued Dialing - NEC Electra Elite IPK II Features And Specifications Manual

Electra Elite IPK II
Description
Continued Dialing allows an extension user to dial a call, wait for the called party to answer and then dial
additional digits. This helps users that need services like Voice Mail, automatic banking and Other
Common Carriers (OCCs).
There are two types of Continued Dialing:
Continued Dialing for Intercom Calls
Depending on an extension's Class of Service, a multiline terminal user may be able to dial additional
digits after their Intercom call connects. In systems with Voice Mail, for example, Continued Dialing lets
extension users dial the different options after the Voice Mail answers. Without Continued Dialing,
extension users cannot access these Voice Mail options.
Continued Dialing for Trunk Calls
Continued Dialing gives a user access to outside services like automatic banking, an outside Automated
Attendant, bulletin boards and Other Common Carriers (OCCs). After the outside service answers, the
user can dial digits for whatever options the services allow. Without Continued Dialing, the system's Toll
Restriction will cut off the call after a specific number of dialed digits. See Programming below for
additional information.
Continued Dialing may make the system more susceptible to toll fraud.
Conditions
r The ability to use Continued Dialing on trunk calls is set by Toll Restriction programming.
r Continued Dialing for intercom calls only applies to calls made to analog type devices.
With Pulse to Tone Conversion, users can place calls to services over Dial Pulse trunks -
r
and then dial DTMF digits after the service answers.
Default Setting
Enabled

Continued Dialing

Continued Dialing
NOTICE
Document Revision 1
2 - 237