NEC Electra Elite IPK II Features And Specifications Manual page 570

Document Revision 1
Link Reconnect – K-CCIS
J
Multiple Call Forwarding – All Calls – K-CCIS
J
Multiple Call Forwarding – Busy/No Answer – K-CCIS
J
Paging Access – K-CCIS
J
Quick Transfer to Voice Mail – K-CCIS
J
Station-to-Station Calling – K-CCIS
J
Uniform Numbering Plan – K-CCIS
J
Voice Call – K-CCIS
J
Voice Mail Integration – K-CCIS
J
Conditions
r Each Electra Elite IPK II system can have up to four K-CCIS routes.
r One DTI-U( ) ETU can be used to support/connect a maximum of four K-CCIS Links.
The Basic Port Package can have up to 63 DTI trunks for K-CCIS voice path.
r
r The Expanded Port Package can have up to 199 DTI trunks for K-CCIS voice path.
r The K-CCIS feature shares the CO/PBX/Tie/DID trunks available for the system.
When assigning a Closed Numbering Plan and DID conversion across K-CCIS is required,
r
the Electra Elite IPK II uses the ARS/F-Route Tables.
r The Electra Elite IPK II uses the F-Route Tables to assign an Open Numbering Plan.
When all K-CCIS voice channels are busy, the Electra Elite IPK II originator of a K-CCIS
r
call hears a busy tone from the system.
r Outgoing CO calls in a K-CCIS network can be routed over the K-CCIS link and use the
distant system CO lines.
r Distant system extension numbers in the K-CCIS network can be assigned to Feature
Access or One Touch keys and Speed Dial buffers.
When a K-CCIS trunk is on hold, the Specified Line Seizure access codes can be used to
r
retrieve the call from its held state.
The Elite ACD Plus can support and distribute incoming calls from a remote K-CCIS office.
r
However, incoming calls to ACD Plus that result in a link reconnect are not supported.
These calls must first be answered by a local station, then can be transferred to ACD Plus
unless it is an internal (Intercom) call.
r The Electra Elite IPK II can support only 2- ~ 8-digit station numbers.
2 - 548
Electra Elite IPK II
K-CCIS - T1