NEC Electra Elite IPK II Features And Specifications Manual page 58

Document Revision 1
14-09-04 Conversation Recording Destination for Trunks - ACI Automatic Recording for Outgoing
Call
Determine whether a trunk should be automatically recorded when an outgoing call is received.
0 = Off
1 = On
15-07-01 Programmable Function Keys
If required, program an ACI Conversation Record Key (code 69 + 0). This key allows an
extension user to press the key to manually record a call to the ACI.
15-12-01 Conversation Recording Destination for Extensions - ACI Recording Destination
Extension Number
Use this option to assign the ACI Call Recording destination on a per extension basis. The
destination can be an ACI port's extension number (assigned in Program 11-06) or an ACI
Department Group pilot number (assigned in Program 11-08). If destinations are assigned in
Programs 14-09 and 15-12, the destination in Program 15-12 will be followed.
15-12-02 Conversation Recording Destination for Extensions - ACI Automatic
Recording for Incoming Call
Determine whether an extension should be automatically recorded when an incoming call is
received.
0 = Off
1 = On
15-12-04 Conversation Recording Destination for Extensions - ACI Automatic
Recording for Outgoing Call
Determine whether an extension should be automatically recorded when an outgoing call is
received.
0 = Off
1 = On
33-01-01 ACI Port Type Setup
Set each ACI software port for input (1) or input/output (2). Use input ports for Music on Hold
sources. Use output ports for External Paging/ringer control.
ACI Ports: 1~96
33-02-01 ACI Department Calling Group
Assign ACI software ports to ACI Department Groups. This lets ACI callers connect to ACI
software ports by dialing the group's pilot number (set in Program 11-08).
ACI Ports: 1~8
ACI Groups: 1~16
2 - 36 Analog Communications Interface (ACI)
Electra Elite IPK II