NEC Electra Elite IPK II Features And Specifications Manual page 522

Document Revision 1
Assign Trunks As Automated Attendant Trunks - Method 2
22-02-01 Incoming Call Trunk Setup
Assign Service Type 0 to each trunk you want to ring into Voice Mail as a normal line.
22-04-01 Incoming Extension Ring Group Assignment
Assign Ring Group 102 for an In-Skin/External Voice Mail, or 103 for a Central Voice Mail as the
destination.
For Either Method:
22-04-01 Incoming Extension Ring Group Assignment
To enable Voice Mail Overflow, assign selected extensions to a Ring Group that will ring for
unanswered DILs to Voice Mail ports. In Program 22-06, enter 1 to enable overflow ringing.
22-08-01 DIL/IRG No Answer Destination
For Voice Mail Overflow, enter the Ring Group that unanswered DILs to Voice Mail will ring after
the DIL Call Waiting time (Program 22-01-04).
24-02-03 System Options for Transfer - Delayed Call Forwarding Time
Set the interval a transferred call waits at a forwarded extension before routing to the called
extension's mailbox.
45-01-01 Voice Mail Integration Options, Voice Mail Department Group Number
Assign which Extension (Department) Group number is to be assigned as the voice mail group.
An entry of '0' means there is no voice mail installed.
Department Groups: 0, 1~64
45-01-02 Voice Mail Integration Options, Voice Mail Master Name
Enter the Voice Mail master name up to 12 characters.
45-01-03 Voice Mail Integration Options, Voice Mail Screening
Enable (1) or disable (0) the system's ability to process the Call Screening commands (1 +
extension number) sent from the Voice Mail. You should normally enable this option to allow for
Voice Mail Call Screening. Disable this option if your system has been modified so that
extensions begin with the digit 1 (e.g., 101, 102, etc.). Also see the Flexible System Numbering
feature.
45-01-04 Voice Mail Integration Options, Park and Page
Enable (1) or disable (0) the system's ability to process the Voice Mail's Park and Page (
commands. You should normally enable this option.
45-01-05 Voice Mail Integration Options, Message Wait
Enable (1) or disable (0) the system's ability to process the Voice Mail's Message Wait (#)
commands. You should normally enable this option. If enabled, be sure that the programmed
Message Notification strings do not contain the code #9 for trunk access. When using an
external voice mail and centrex transfer, this option should be disabled or the service code #3 in
Program 11-12-42 will need to be changed.
2 - 500
Electra Elite IPK II
∗
)
IPK II In-Mail