Document Revision 1
Connecting
As can be seen in
Figure 2-7 PC Programming
PCPro/WebPro.
If using PCPro, a user can connect directly, remotely using a modem or via LAN. A connection with the
KTS is made via the "Connection Dialog" within the application. (Refer to
Dialog
Box.)
Direct connections are established using the RS232 serial port (COM Port 1) on the side of the
J
KTS.
Modem (remote) connections are established via the internal CPU modem. You need to dial in to
J
an extension on the KTS and redirect that extension to the internal modem.
IP (LAN) connections are established via the Ethernet connector on the CPU card.
J
2 - 660
Overview, three connection types are available to
Figure 2-8 PCPro Connection Dialog Box
Figure 2-8 PCPro Connection
Set up the COM port to match
the KTS (PRG 10-21-02 on the
KTS)
IP address of the KTS (PRG
10-12-01 on the KTS)
User Name/Password is taken
from PRG 90-02 on the KTS
Electra Elite IPK II
PC Programming