NEC Electra Elite IPK II Features And Specifications Manual page 331

Electra Elite IPK II
22-04-01 Incoming Extension Ring Group Assignment
Assign the extensions that should receive the overflow. Set the ringing in Program 22-06.
0 = Trunks Do Not Ring [just flash line keys]
1 = Trunks Ring
25-01-01 VRS/DISA Line Basic Data Setup - VRS/DISA Dial-In Mode
Select whether the DISA trunk will use the Extension number/Service code specify (0) or the
Dial Conversion Table (1).
25-01-02 VRS/DISA Line Basic Data Setup - DISA User ID
Select whether or not the DISA User ID is to be used.
0 = Disable
1 = Enable
25-01-03 VRS/DISA Line Basic Data Setup - VRS/DISA Transfer Alarm
Select whether the DISA transfer alarm should be used.
0 = Normal
1 = Alarm
25-02-01 VRS/DISA VRS Message
Assign the source and VRS message number to be used as the Automated Attendant Message
for each trunk (001~200) which is assigned as a VRS/DISA:
0 = No Message
1 = VRS (VRS Message Number = 01~48)
2 = ACI (ACI Group Number = 01~16)
3 = SLT (Department Group Number = 01~64).
25-03-01 VRS/DISA Transfer Ring Group With Incorrect Dialing
Set the operating mode of each DISA trunk. This sets what happens to the call when the DISA
caller dials incorrectly. The call can either disconnect (0), transfer to an alternate ring group
destination, or transfer to In-Skin/External Voice Mail, or Centralized Voice Mail.
Ring Groups:31~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
Direct Inward System Access (DISA)
Document Revision 1
2 - 309