NEC Electra Elite IPK II Features And Specifications Manual page 631

Electra Elite IPK II
Programming
In 14-08-01,
enter 0.
Should the CPU
use the internal
or external
source?
Internal
In 10-04-01,
enter 0.
Is the MOH
gain
acceptable?
No
In 10-04-03, adjust
the audio gain
setting (1~63).
Music on Hold
Should a trunk use the
CPU, or the external
source connected to
CPU
the BGM or ACI port for
External
In 14-08-01, enter 1.
In 10-04-01,
enter 1.
In 10-21-01, set the
external relay to 1.
Start
Note: Other ACI programming may be
necessary. Refer to
MOH?
BGM Port
Stop
Document Revision 1
Analog Communications
Interface (ACI) on page 2-31.
In 14-08-01,
ACI Port
enter 2.
In 10-03-01, confirm the
PGD(2)-U10 ADP to be
used for external music
source is recognized and
has type '9' assigned.
In 11-06-01, assign an
extension number to the ACI
port. Select a number outside
the normal extension number
range (e.g., 400).
In 33-02-01, assign ACI
software ports (1~96) to an
ACI Department Group
(1~16).
In 11-08-01. assign a pilot
number to the ACI group.
In 14-08-02. enter the ACI
source port number
(1~96) for each trunk.
In 33-01-01, set the ACI
port to 1.
2 - 609