NEC Electra Elite IPK II Features And Specifications Manual page 720

Document Revision 1
Related Features
Automatic Route Selection (ARS)
Central Office Calls, Placing
Last Number Redial
Save Number Dialed
Single Line Telephones, Analog 500/2500 Sets
Programming
15-07-01 Programmable Function Keys
Assign a function key for Repeat Redial (code 29).
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-08-07 Class of Service Options (Outgoing Call Service) - Repeat Redial
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to use Repeat
Redial.
21-08-01 Repeat Dial Setup - Repeat Redial Count
Set how many times Repeat Redial will automatically repeat if the call does not go through.
21-08-02 Repeat Dial Setup - Repeat Redial Interval Time
Set the interval between Repeat Redial attempts (0-64800 seconds).
21-08-03 Repeat Dial Setup - Repeat Dial Calling Timer
Set how long the system waits (0~64800 seconds) for the called party to answer after a Repeat
Redial. If the called party does not answer within this interval, the system hangs up and tries
again (after the Repeat Redial Interval Time). For unanswered calls, the total time between
retries is the sum of Items 21-08-02 and 21-08-03.
21-08-04 Repeat Dial Setup - Time for Send Busy Tone for ISDN Trunk
Set the timer (sec) to send out Busy Tone with an ISDN line, when called party is in busy.
2 - 698
Electra Elite IPK II
Repeat Redial