Removing The Static Eliminators (Swing Guide Unit) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Static Eliminators (Swing Guide Unit)

Removing the Static Eliminators (Swing Guide Unit)

2) Lower the swing guide.
1) Remove the grate-
shaped upper guide.
(Refer to page 4-23)
CAUTION:
When the swing guide upper cover is reassembled, put
the arms of swing guide in the link holder.
4 Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Static Eliminators (Swing Guide Unit)
3)Remove the 6 screws and then remove the swing guide upper
cover.
F-4-100
x6
4) Remove each 2 screws and detach the static eliminators front and
left.
x2
F-4-102
F-4-101
CAUTION:
When attaching
the swing guide
upper cover,
check the position
attached the swing
guide unit.
(Refer to page 4-45)
F-4-103
4-44
4-44