Removing The Tray 2 Motor Driver Pcb - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > PCBs > Removing the Tray 2 Motor Driver PCB

Removing the Tray 2 Motor Driver PCB

1) Remove the 7 screws and remove the tray 2 upper cover.
x4
3) Remove the 3 connectors and 2 screws, and then remove the
tray 2 motor driver PCB.
4
Parts Replacement and Cleaning Procedure > PCBs > Removing the Tray 2 Motor Driver PCB
x3
F-4-201
F-4-204
2) Remove the 2 screws and remove the tray motor cover.
F-4-202
4-82
F-4-203
4-82