Processing Tray Unit; Outline - Canon Staple Finisher-D1 Service Manual

2
Technology > Processing Tray Unit > Outline

Processing Tray Unit

Outline

In the processing tray unit, the fed sheets are stacked to be shifted or stapled. The stack of
sheets is then delivered to the stacking tray.
When sheets are delivered straight without being shifted or stapled, they are not stacked in
the processing tray.
Names and functions of the components of the processing tray unit are as follows:
[5] Swing Guide
[6] Upper Stack Delivery Roller
[7] Lower Stack Delivery Roller
[8] Alignment Plate
2 Technology > Processing Tray Unit > Outline
[4] Paper Trailing Edge Pushing Guide
[3] Pre-Delivery Roller
[2] Paper Return Guide
[1] Paper Retainer
[9] Gripper
F-2-21 F-2-21
[8] Alignment Plate (rear)
[9] Gripper
[10] Stopper
[11] Tray Auxiliary Guide
[12] Stacking Tray Paper Retainer
[11] Tray Auxiliary Guide
2-15
[10] Stopper
[9] Gripper
[10] Stopper
[8] Alignment Plate (front)
2-15
F-2-22 F-2-22