Pcbs; Removing The Finisher Controller Pcb - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > PCBs > Removing the Finisher Controller PCB

PCBs

Removing the Finisher Controller PCB

2) Disconnect the connectors and remove the 4 screws, and then
1) Remove the rear cover
remove the finisher controller PCB.
(upper).
(Refer to page 4-19)
4
Parts Replacement and Cleaning Procedure > PCBs > Removing the Finisher Controller PCB
F-4-196
4-80
4-80