Removing The Tray-1 Torque Limiter - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Tray-1 Torque Limiter

Removing the Tray-1 Torque Limiter

1) Remove the 7 screws and remove the tray-1 upper cover.
x4
3) Pull out the pins and remove the torque
limiters.
F-4-95
4 Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Tray-1 Torque Limiter
x3
F-4-92
2) Remove the screw and take out the torque limiter unit.
x1
F-4-93
4-42
F-4-94
4-42