Feeding Unit; Outline - Canon Staple Finisher-D1 Service Manual

2
Technology > Feeding Unit > Outline

Feeding Unit

Outline

The feeding unit feeds the paper to the stacking tray or the saddle stitcher unit in response to
the instructions from the finisher controller PCB.
The paper feeding path to the stacking tray is equipped with the following 2 sensors for
monitor of the paper feed and the detection of a jam.
Inlet Sensor (S101)
Feed Path Senor (S102)
Finisher Controller PCB
[1] [2] [3]
M122 M104 M102
2 Technology > Feeding Unit > Outline
[4] [5] [6] [7]
M119 M101 SL206 M200
F-2-5 F-2-5
Finisher Controller PCB
[1] [2] [3] [4] [5] [6]
M116 M117 M114 M110 M108 M109 M113
[1] Stack Delivery Lower/Shutter Motor drive
signal
[2] Stack Delivery Upper Motor drive signal
[3] Buffer Feed Motor drive signal
[4] Feed Roller Disengage/Buffer Flapper
Motor drive signal
[5] Feed Motor drive signal
[6] Saddle Inlet Flapper Solenoid drive signal SL206
[7] Inlet Feed Motor drive signal
[7] [8] [9] [10] [11] [12] [13]
M112 M118 M121 M120 M215 M107
F-2-6 F-2-6
Stack Delivery Lower/Shutter
M122
Motor
Stack Delivery Upper Motor
M104
M102 Buffer Feed Motor
M119 Feed Roller Disengage/Buffer
Flapper Motor
M101 Feed Motor
Saddle Inlet Flapper Solenoid
M200 Inlet Feed Motor
2-5
T-2-2 T-2-2
2-5