Removing The Paper Holding Roller; Removing The Shutter Clutch (Cl102) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Shutter Clutch (CL102)

Removing the Paper Holding Roller

2) Lower the paper holder roller arm and then remove the paper
1) Remove the processing
tray unit. holder roller.
(Refer to page 4-30)

Removing the Shutter Clutch (CL102)

1) Open the front door.
<Finisher (Staple Finisher)>
F-4-125
4 Parts Replacement and Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Shutter Clutch (CL102)
F-4-124
<Saddle Finisher (Booklet Finisher)>
3) Disconnect the connector and take out the clip, and then remove the
2) Remove the left inner
cover. shutter clutch.
(Refer to page 4-20)
F-4-126
4-54
F-4-127
4-54