Switches; Removing The Staple Safety Switch (Front/Rear) (Sw102/Sw104) -4-79 - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Switches > Removing the Staple Safety Switch (Front/Rear) (SW102/SW104)

Switches

Removing the Staple Safety Switch (Front/Rear) (SW102/SW104)
2) Lower the swing guide.
1) Remove the grate-
shaped upper guide.
(Refer to page 4-23)
4) Open the wire saddle to release the harness and disconnect the 2
connector, then remove the staple safety switch (rear).
x1
4 Parts Replacement and Cleaning Procedure > Switches > Removing the Staple Safety Switch (Front/Rear) (SW102/SW104)
3) Open the wire saddle to release the harness and disconnect the
2 connector, then remove the staple safety switch (front).
x1
F-4-193
F-4-195
F-4-194
4-79
4-79