Canon Staple Finisher-D1 Service Manual page 164

6) Place the casters of the finisher on the slope boards,
and then move the finisher slowly from the pallet
down to the floor.
F-6-17 F-6-17
8) For Booklet Finisher-D1, remove three screws and then remove the fixing.
<Booklet Finisher-D1>
6
Installation > Unpacking and Checking the Contents > Unpacking Procedure
Caution:
Move the finisher down to the floor carefully so that the casters do not slip off the slop boards.
•
Be sure to hold the top [A] of the finisher when moving the finisher from the slope boards down
•
to the floor.
x3
F-6-19 F-6-19
6 Installation > Unpacking and Checking the Contents > Unpacking Procedure
[A] [A]
7) Remove all pieces of packing tape
used outside the finisher.
F-6-18 F-6-18
6-11
6-11