Connecting To Paper Folding Unit - Canon Staple Finisher-D1 Service Manual

■

Connecting to Paper Folding Unit

1) Using four screws, attach two latch catches (front and rear) on the left side of the paper
folding unit.
x4
6
Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Staple Finisher-D1 only] > Connecting to Paper Folding Unit
F-6-43 F-6-43
6 Installation > Installation Procedure > Preparation for Installation on Upstream Connection Machine Side [Staple Finisher-D1 only] > Connecting to Paper Folding Unit
2) Attach the positioning pin using two screws.
MEMO:
• The latch catch has three
screw holes. Use two screw
holes according to the
mounting position on the
paper folding unit.
The two latch catches are
•
identical to each other.
x2
6-19
F-6-44 F-6-44
6-19