Points to Note on Installation
■
Order of Installation of Options
When installing the finisher together with other options, first install the host machine and then install options in the following order:
Document Insertion Unit-K1
Professional Puncher-C1
Paper Folding Unit-H1
A
Staple Finisher-D1
Booklet Finisher-D1
6
Installation > Checking Before Installation > Points to Note on Installation > Order of Installation of Options
Puncher Unit
A
Inner Booklet Trimmer-A1
6
Installation > Checking Before Installation > Points to Note on Installation > Order of Installation of Options
1. POD Deck Lite-A1/Paper Deck Unit-C1
POD Deck Lite-A1
2. Document Insertion Unit-K1
3. Professional Puncher-C1
4. Paper Folding Unit-H1
5. Staple Finisher-D1/Booklet Finisher-D1
6. Puncher Unit *1
7. Inner Booklet Trimmer-A1 *1/*2
*1: The puncher unit and inner booklet trimmer are to be installed in the
finisher. Install these units together with the finisher or after installing
the finisher.
*2: Booklet Finisher-D1 only
Paper Deck Unit-C1
F-6-8
F-6-8
6-6
6-6