Removing The Staple Shift Motor (M107) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Motors > Removing the Staple Shift Motor (M107)

Removing the Staple Shift Motor (M107)

2) Turn the dial to the allow direction to shift the staple unit to the rear side.
1) Remove the left inner
cover.
(Refer to page 4-20)
]
4) Remove the 4 screws to detach the motor mount.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Staple Shift Motor (M107)
F-4-155
5) Remove the 2 screws and remove the staple shift motor.
F-4-157
3) Remove the motor connector. Release the sensor harness from the wire saddle
and the edge saddle.
F-4-158
4-65
F-4-156
4-65