Hood Removal; Seat And Fender Removal - Toro 260 Series Service Manual

CHASSIS

Hood Removal

1. Disconnect the headlight wiring harness (Figure
49).
Figure 49
2. Remove the bolts and nuts located at the bottom
of the hood (Figure 50).
Figure 50
3. Reinstall the hood in reverse order.
2 - 16

Seat and Fender Removal

1. Unplug the seat switch, and if equipped with
KeyChoice™ Reverse operating system, unplug
the KeyChoice™ switch (Figure 51).
MVC-116X
2. To make it easier to remove the fasteners for the
fender assembly, jack the tractor up in the rear
and remove both rear tires.
3. Remove the two rear carriage bolts, washers, and
nuts located in the rear of the fender assembly
(Figure 52).
MVC-118X
Figure 51
Figure 52
260 Series Tractor Service Manual
MVC-121X
MVC-122X