Chassis; Model And Serial Number Location; Greasing And Lubrication - Toro 260 Series Service Manual

Model and Serial Number Location

The model and serial number plate location is under
the seat (Figure 3).
Figure 3

Greasing and Lubrication

The machine should be greased every 50 hours or
yearly, whichever occurs first. You should grease
more frequently when operating conditions are
extremely dusty or sandy.
Grease Type: General-purpose grease.
There are 5 grease fittings located in the front axle
area:
1. One located on the inside of each wheel hub (2
total).
2. One located on each end of the front axle for the
spindles (2 total).
260 Series Tractor Service Manual
3. One located on the front axle pivot area (1 total)
(Figure 4).
Hydrostatic model tractors have one grease fitting on
MVC-084X
the forward/reverse pedal (Figure 5).

CHASSIS

Figure 4
MVC-085X
Figure 5
MVC-088X
2 - 1