Belt Replacement - Gear Drive - Toro 260 Series Service Manual

Belt Replacement – Gear Drive
1. Position the steering wheel so the tie rod ends
clear the front axle and remove them from the
steering arms (Figure 188).
Figure 188
2. Disconnect the electric PTO (Power Take Off)
wiring harness and remove the battery drain tube
from the tie strap (Figure 189).
Figure 189
260 Series Tractor Service Manual
3. Loosen the belt guide located on the left side of
the engine drive pulley and move away from the
drive belt (Figure 190).
4. Loosen and move the belt guide located on the
MVC-263X
idler pulley on the right side of the engine drive
pulley (Figure 191).
MVC-264X
GEAR DRIVE
Figure 190
Figure 191
MVC-266X
MVC-267X
5 - 7