Toro 260 Series Service Manual page 2

ABOUT THIS MANUAL
This service manual was written expressly for Toro service technicians. The Toro Company
has made every effort to make the information in this manual complete and correct.
Basic shop safety knowledge and mechanical/electrical skills are assumed. The Table of
Contents lists the systems and the related topics covered in this manual.
For additional information on the electrical system, please refer to the Toro Electrical
Demystification Guide (492-4404). For service information on drive systems, please refer to
the appropriate service manual: Tuff Torq (492-0699), Hydro-Gear (492-0682), Peerless
(contact Tecumseh Products). For information specific to the engines used on this unit, refer
to the appropriate engine manufacturer's service and repair instructions.
Tractor model years 1994 - 2002 are covered in this manual. The manual may also be
specified for use on later model products.
The hydrostatic transaxle is a sophisticated piece of machinery. Maintain strict cleanliness
control during all stages of service and repair. Cover or cap all hose ends and fittings
whenever they are exposed. Even a small amount of dirt or other contamination can
severely damage the system.
We are hopeful that you will find this manual a valuable addition to your service shop. If you
have questions or comments regarding this manual, please contact us at the following
address:
The Toro Company reserves the right to change product specifications or this manual
without notice.
The Toro Company
Consumer Service Department
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Copyright© All Rights Reserved
©2002 The Toro Company