Hydrostatic Transaxles; Identification: Tuff Torq Model K61A Transaxle; General Specifications - Toro 260 Series Service Manual

Hydrostatic Transaxles

Identification:
Tuff Torq Model K61A Transaxle
MVC-080X

General Specifications

Used 1994 – 1999
Lubrication SAE 10W-30 API Service Classification SH or higher. Alternate oil: A
synthetic oil (5w50 or similar viscosity range) may be used in place of SAE 10w30. This will
permit an increase in the maximum operating temperature of approximately 18°F (10°C).
Oil Capacity 3.5 qt. (3.3 liter)
Oil Level Check when transaxle is cold. Oil should be checked at the reservoir cup, located under the
front hood, on the panel support; oil level should be at the cold mark.
Fluid Change The transaxle is factory filled and does not require regular oil changes.
Ground Speed Forward
Reverse
260 Series Tractor Service Manual
SPECIFICATIONS
0-5.2 MPH (0-8.3km/h)
0-2.3 MPH (0-3.7km/h)
1 - 3