Toro 260 Series Service Manual page 23

2. Remove right and left tie rods from the front
spindle arms (Figure 17).
Figure 17
3. On the front of the axle, in the center, remove the
E-ring and washers (Figure 18).
Figure 18
4. Remove the electric PTO clutch from the engine
crankshaft.
260 Series Tractor Service Manual
5. On the back side of the axle, remove the bolt on
the axle pin (Figure 19).
MVC-105X
6. Remove the axle pin; use a drift punch and
hammer to tap the axle pin out; if needed (Figure
20).
MVC-106X
7. Installation – reverse the order of removal.
CHASSIS
Figure 19
Figure 20
MVC-107X
MVC-108X
2 - 5