Toro 260 Series Service Manual page 26

CHASSIS
4. Rotate the steering shaft until the top bolt of the
universal joint faces the rear of the tractor.
Remove the bolt (Figure 28).
Figure 28
5. Pull the top shaft from the universal joint and
remove it from the top of the tractor (Figure 29).
Figure 29
2 - 8
6. Disconnect the relays from the mounting bracket
and remove the bracket from the tractor. Place
the wiring harness and fuse block to the side of
the console (Figure 30).
6-11
7. Rotate the steering gear shaft until the bottom bolt
of the universal joint faces the front of the tractor.
Remove the bolt (Figure 31).
6-12
Figure 30
Figure 31
260 Series Tractor Service Manual
6-13
6-14