Toro 260 Series Service Manual page 43

9. Remove the 3 screws retaining the transaxle fan
to the input pulley; this will give you enough
clearance to remove the drive belt from the
transaxle input pulley (Figure 69).
Figure 69
10. Use a floor jack and put it under the transaxle to
help lower the transaxle from the frame (Figure
70).
Figure 70
260 Series Tractor Service Manual
TUFF TORQ TRANSAXLE
11. Located on the right front side of the transaxle is a
torque strap. Remove the bolt and nut (Figure
71).
MVC-328X
12. Remove the 4 nuts from the U-bolts which hold
the two axle shafts to the frame (Figure 72).
MVC-329X
Figure 71
Figure 72
lMVC-331X
MVC-330X
3 - 3