18. Connect the idler spring to the frame bracket
(Figure 204).
Figure 204
19. Adjust the front idler belt guides (located on the
right side of the engine drive pulley) within 1/8"
(3mm) from the belt. Adjust the belt guide located
on the left side of the engine drive pulley so it is
within 1/8" (3mm) from the belt (Figure 205).
Figure 205
260 Series Tractor Service Manual
20. Reconnect the electric PTO and route the battery
drain tube through the tie strap (Figure 206).
MVC-268X
21. Connect the tie rod ends to the steering arms
(Figure 207).
MVC-279X
GEAR DRIVE
Figure 206
Figure 207
MVC-264X
MVC-280X
5 - 11