1MRK 511 358-UUS A
Section 3
3.1
Introduction
3.2
Description of configuration REC670
3.2.1
Introduction
3.2.1.1
Description of configuration A30
The configuration of the IED is shown in Figure 3.
This configuration is used in single breaker arrangements with single or double busbar.
Control, measuring and interlocking is fully configured.
The following should be noted. The configuration is made with the binary input and binary output
boards in the basic delivery. In many cases this is sufficient, in other cases, for example with full
control of all apparatuses included, more IO cards are required. Our proposal for a full version with
control is to use two binary input modules and one binary output module.
Application manual
Configuration
Section 3
Configuration
SEMOD120082-1 v1
SEMOD120089-4 v8
IP14799-1 v2
IP14800-1 v1
M15200-3 v7
45