Generic Profile Technical Data - ABB ACH580 Series User Manual

182

Generic profile technical data

Overview
The generic profile aims to fulfill the industry-standard drive profile for each protocol
(e.g. PROFIdrive for PROFIBUS, AC/DC Drive for DeviceNet).
Control Word
As described earlier in
controlling the drive from a fieldbus system. For specific CONTROL WORD content,
see the user's manual provided with the FBA module.
Status Word
As described earlier in
status information, sent by the drive to the master station. For specific STATUS
WORD content, see the user's manual provided with the FBA module.
Reference
As described earlier in
frequency reference.
Note: REF2 is not supported by the Generic Drive profiles.
Reference scaling
REFERENCE scaling is fieldbus type specific. However, at the drive, the meaning of
a 100% REFERENCE value is fixed as described in the table below. For a detailed
description on the range and scaling of the REFERENCE, see the user's manual
supplied with the FBA module.
REF
Fieldbus adapter
Control interface
Control
Control
Reference Range
-32767...
+32767
ACH580 E-Clipse bypass and packaged drive user manual
the control word is the principal means for
interface, the contents of the STATUS WORD is
interface, the REFERENCE WORD is a speed or
ABB Drives Profile (FBA)
Reference
Scalar
Type
Frequency -20000 = -(par 46.02)
+20000 = (par 46.02)
Speed -20000 = -(par 46.01)
+20000 = (par 46.01)
Remarks
Final reference limited
by 30.13/30.14
Final reference limited
by 30.11/30.12