ABB ACH580 Series User Manual page 145

136
Instance
ID
BV10
BV11
BV12
BV13
BV14
BV15
BV16
BV17
BV18
BV19
BV20
BV21
Embedded fieldbus
ACH580 E-Clipse bypass and packaged drive user manual
Object Name
RUN/STOP CMD This Object commands a system
start. This requires bypass
parameter 1601 value = COMM
for BACnet to control.
OVERRIDE CMD This Object commands the
system to an override 2
condition. This requires bypass
parameter 1701 value = COMM
for BACnet to control.
RUN This Object commands the
PERMISSIVE system Run Permissive. This
CMD requires bypass parameter 1602
value = COMM for BACnet to
control.
OVERRIDE ACT This Object indicates if override
1 or override 2 is active
regardless of the control source.
FAULT RESET This Object resets a faulted
bypass. This requires bypass
parameter 1607 value = COMM
for BACnet to control.
START This Object commands the
INTERLOCK 1 system Start Interlock 1. This
requires bypass parameter 1603
value = COMM for BACnet to
control.
START This Object commands the
INTERLOCK 2 system Start Interlock 2. This
requires bypass parameter 1604
value = COMM for BACnet to
control.
START This Object commands the
INTERLOCK 3 system Start Interlock 3. This
requires bypass parameter 1605
value = COMM for BACnet to
control.
START This Object commands the
INTERLOCK 4 system Start Interlock 4. This
requires bypass parameter 1606
value = COMM for BACnet to
control.
PAR LOCK When switched to locked
prevents parameter changes
from the panel.
CTL OVERRIDE Commands the bypass into
CMD BACnet Control Override. In this
mode, BACnet takes the bypass
control from the normal source.
However, the panel's HAND
mode still has priority.
MBOX READ This object reads a parameter
(defined by AV13 MBOX
PARAM) and returns it in AV14
MBOX DATA
Description
Inactive Text
RUN/ STOP
YES/NO
ENABLE/
DISABLE
YES/NO
RESET/ NO
ENABLE/
DISABLE
ENABLE/
DISABLE
ENABLE/
DISABLE
ENABLE/
DISABLE
LOCK /
UNLOCK
ON / OFF
READ /
RESET
Active/ Present Value
Access Type
C
C
C
R
C
C
C
C
C
W
C
W