Feedback From The Drive - Fba; Activate Bypass Control Functions - Fba - ABB ACH580 Series User Manual

170
Feedback from the drive – FBA
Inputs to the controller (drive outputs) have pre-defined meanings established by the
protocol. This feedback does not require drive configuration. The following table lists
a sample of feedback data. For a complete listing, see all parameters listed in
Parameter list and
01.01
01.06
01.07
01.10
01.14
01.11
01.13
58.19
58.19
10.02
Scaling
To scale the drive parameter values see the
sections, as appropriate:
• ABB drives profile technical data
• Generic profile technical data
Activate bypass control functions – FBA
Controlling the bypass
Fieldbus control of various bypass functions requires configuration to:
• Tell the system to accept fieldbus control of the function.
• Define as a fieldbus input, any bypass data required for control.
• Define as a fieldbus output, any control data required by the drive/bypass.
The following sections describe, at a general level, the configuration required for
each control function. The last column in each table below is deliberately blank. See
the User's Manual supplied with the FBA module for the appropriate entry.
Fieldbus adapter
ACH580 E-Clipse bypass and packaged drive user manual
descriptions.
Drive Parameter
Motor Speed Used
Output Frequency
Motor Current
Motor Torque
Output Power
DC Voltage
Output Voltage
FB STATUS WORD – bit 0 (STOP)
FB STATUS WORD – bit 2 (REV)
DI Delayed Status
Protocol Reference
Modbus TCP
400257
400262
400263
400266
400270
400267
400269
414867 bit 0
414867 bit 2
402562
Actual value scaling in the following