ABB ACH580 Series User Manual page 23

14
E-Clipse Bypass
Control Board
Terminals X2
Disconnect
Switch or
Circuit Breaker
Input
Terminals
Input
Ground Lug
Motor
Ground Lug
Motor
Terminals
Fuses
Service Switch
(Optional)
Installation
ACH580 E-Clipse bypass and packaged drive user manual
RHTR Temperature
HI/LO Jumper (X1)
Default Setting
(X1 jumper in LO
position)
Alternate Setting
(X1 jumper in HI
position)
The alternate (HI) setting further reduces the
likelihood of condensate in high humidity
environments.
ACH580 Drive
B2
(Bx3R-2)
Heater ON Heater OFF
Temperature Temperature
14.4 °C 21.4 °C
58 °F 70.5 °F
17.8 °C 24.4 °C
64 °F 76.5 °F