Enabling Dataguard - GE Sievers 900 Series Operation And Maintenance Manual

Enabling DataGuard

DataGuard is locked until you enter the Activation Code by following the steps below. When
activating DataGuard, to ensure system security we strongly recommend that you create a new
administrator-level account and inactivate the default administrator account (Steps 7 through 21
below).
1. Insert the USB flash drive containing the DataGuard activation into the Analyzer's USB
port.
2. Press the Menu button, select the Maintenance tab, and press the Advanced button.
3. Press the Activate Options button.
4. Press the OK button and wait for the Analyzer to detect the USB flash drive.
5. Press the Activate button to enable DataGuard.
When the DataGuard is activated, the Analyzer security settings are immediately put into
effect and you will be required to log in to the Analyzer with the default administrator User
ID and Password.
User ID: ADMIN
Password: GEAI
6. Press the Login button and enter the default administrator Login ID. Press Enter.
7. Enter the Password and press Enter.
After you log in for the first time, create a new administrator-level account and inactivate
the default administrator account as follows:
8. Press the Menu button and select the DataGuard tab.
9. Press the Add User button.
10. Specify a new User ID for the administrator and press the Enter button.
11. Specify the Password for the administrator User ID and press Enter.
12. Verify the Password and press Enter.
13. Press the User Level button and select Administrator.
14. Press the Password Expired button and select False.
15. Press the Menu button.
16. Press the Logout button. You will now use the new administrator account and delete the
default account.
GE Analytical Instruments ©2009 127 of 236 DLM 90488-01 Rev. A