Managing Data History; Setting Up Data History - GE Sievers 900 Series Operation And Maintenance Manual

Managing Data History

The Analyzer stores the TOC measurement data history in RAM. On the Data tab (see Figure 14) you
can configure the way your Analyzer stores and displays the data history; you also can initiate
printing and exporting of the data.
Data
Setup
View
Graph
Print
Export
Main

Setting up Data History

The data history can accomodate approximately 33,000 entries (at least 90 days of usage when the
Analyzer is not used in the optional Turbo mode).
1. Select the Data tab.
2. Press the Setup History button.
3. Set the Archive Data option to On or Off. If you select Off, the Analyzer assumes the use of
a PC to capture data and data will not be stored on the Analyzer.
Note:
If the DataGuard option has been purchased and enabled, Archive Data is set to
When the data history is filled, analysis is stopped until the data history is printed or
exported. See "Using DataGuard" on page 126 for more information.
4. If you wish to have data automatically downloaded to a USB flash memory drive, press the
Daily Download button and select On. Then, press the Download Time button and enter a
GE Analytical Instruments ©2009
Data I/O Maintenance
Setup History
Print Archive
Export Archive
Start Analysis
Figure 14: The Data Tab
100 of 236
4 Mar 2004 08:22
DataGuard
On
.
DLM 90488-01 Rev. A